Nixie Maestro Kit (No Tubes) NOW SHIPPING

Price: £59.95


Add to Cart:

 


What is Nixie Maestro?

Nixie Maestro is a  fully-featured nixie clock kit, using a semi - assembled SMD board. Only a small number of through-hole components need to be soldered. The clock shows time and date on six vintage IN-12 Nixie Tubes, which are sourced from the former Soviet Union. Each tube has a RGB LED to illuminate it, which creates a beautiful spectrum of colour effects. Plexi cases are available separately in the Cases section of our site. 



IN-12 Nixie Tubes not included. See HERE for the kit with tubes included

· Hours, Minutes and Seconds display
· 12 or 24 hour modes
· Uses a Quartz Crystal Oscillator as the timebase
· Programmable leading zero blanking
· Date display in either DD.MM.YY or MM.DD.YY format
· Programmable date display each minute
· Scrolling display of date or standard display
· Alarm, with programmable snooze period
· Optional GPS synchronisation with status indicator LED
· Dedicated DST button to switch between DST and standard time
· Supercapacitor backup. Keeps time during short power outages
· Simple time setting using two buttons
· Programmable leading zero blanking
· Five programmable neon colon settings (Flashing AM/PM indication, illuminated AM/PM indication, both flashing, both on, both off)
· Seconds can be reset to zero to precisely the set time
· Programmable night mode - blanked or dimmed display to save tubes or prevent sleep disturbance
· Rear Indicator LEDs dim at night to prevent sleep disturbance
· Weekday aware ‘Master Blank’ function to turn off HV/ tubes on weekends or during working hours
· Separate modes for colon neons during night mode
· Standard, fading, or fading + scrollback display modes
· ‘Slot Machine’ cathode poisoning prevention routine
· Programmable RGB tube lighting – select YOUR favourite colour palette

· 729 colours possible. Have a different colour of your choice every hour, or autochanging colours
· Not AC frequency dependent – works in all countries
· All user preferences stored to non-volatile memory

 

Download Kit Assembly Instructions Here

PCB Dimensions:
172mm X 55mm
7.7" X 2.2" 
Digit height: 18mm / 0.7"


All the SMD components are pre-soldered! Only a few through hole components need to be soldered.
Download Kit Assembly Instructions Here



The PCB is almost fully pre-assembled with SMD parts. You only need to solder a small number of through - hole components

Smoked Plexi Case available here



Clear Plexi Case available here

Compatible with our Micro GPS Time Receiver and NTP Sync Device:


  

 




 


Clear Plexi Case available here
 

 



You will need a 500mA 12V DC Power Adapter. It is not included, but you can find the specification here, and if you don't already have one at home or office, we have them for sale.

Download Kit Assembly Instructions Here


  • Model:
    [MAESTRONOTU]
  • Shipping Weight: 0.3lbs
  • 36 Units in Stock