R|568M Single Nixie Clock Kit (No Tube)

Price: £34.95

Add to Cart:

After a break of almost 5 years, we are very happy to announce the return of our Single Nixie Clock Kit!

How can the clock display the time with only a single digit?

The clock flashes up the time in the sequence HHMM, with appropriate pauses between each digit, and a longer pause between each time cycle ie. H.H...M.M.....H.H...M.M.... and so on. It is really very intuitive, and once you 'get it', it is really obvious and simple to read the time!

R|568M Nixie Tube not included.


· Hours and Minutes display on a Dalibor Farny R|568M Tube
· 12 or 24 hour modes
· Uses 5V USB Power
· Uses a Quartz Crystal Oscillator as the timebase
· Optional GPS or WiFi synchronisation with status indicator LED
· Dedicated DST button to switch between DST and standard time
· Supercapacitor backup. Keeps time during short power outages
· Simple time setting using two buttons
· Seconds can be reset to zero to precisely the set time
· Programmable night mode blanking to save tubes or prevent sleep disturbance
· Programmable RGB tube lighting – select YOUR favourite colour

· Not AC frequency dependent – works in all countries
· All user preferences stored to non-volatile memory

Download Kit Assembly Instructions Here
Digit height: 50mm on R|568M Nixie Tube (not included)

All these components supplied

Download Kit Assembly Instructions Here

This is how the main PCB looks after you have soldered all the parts!

This is the top of the main PCB, showing the 6X2 connector to the tube PCB. Hex Spacers ARE Included.

Rear of the PCB with 5V USB power input (left) and GPS or WiFi input (right)

Compatible with our Micro GPS Time Receiver and NTP Sync Device:


After you have assembled the kit, this is what you will have, ready for the R|568M tube

Finned Case available here

You will need a USB Male A to mini B cable, and if you don't already have one at home or office, we have them for salhere.

  • Model:
  • Shipping Weight: 0.09kgs
  • 1 Units in Stock