TUBES NOT INCLUDED.

Compatible Tubes:
ZM1040
ZM1042
Z566M
Z5660M
Dolam LC-631

Download Kit Assembly Instructions Here

All these tubes are European with 30mm digit height. Although slightly smaller than the more well known IN-18 tubes, these are very beautiful and reliable tubes. Look on ebay for any of the above tube types. The Orange coated tubes are fine too - you can easily remove the coating by soaking the tubes in hot soapy water. The coating just peels off like a decal.

Pictured here in PRISMA Case. Not included, but available here

Here is a brief overview of some of the features and functions:

• Hours, Minutes and Seconds display on six ZM1040 or compatible Nixie Tubes
• 30mm (1.2") digit height 
• Direct drive to six medium size Nixie Tubes
• Noiseless, Direct Drive giving optimum digit clarity
• Uses a Quartz Crystal Oscillator as the timebase
• 12 or 24 hour modes
• Programmable leading zero blanking
• Date display in either DD.MM.YY or  MM.DD.YY or YY.MM.DD format
• Programmable date display each minute
• Scrolling display of date or standard display
• Alarm, with programmable snooze period
• Optional GPS / WiFi /  XTERNA synchronisation with status indicator LED
• Dedicated DST button to switch between DST and standard time
• Supercapacitor backup. Keeps time during short power outages
• PIR Motion Sensor input and accessory available. Configurable timeout period
• Simple time setting using two buttons
• Configurable for leading zero blanking
• Double dot colon neon lamps with cover glasses
• 11 colon neon modes including AM / PM indication (top / bottom or left / right), railroad (slow or fast) etc.
• Seconds can be reset to zero to precisely the set time
• Programmable night mode - blanked or dimmed display to save tubes or prevent sleep disturbance
• Rear Indicator LEDs dim at night to prevent sleep disturbance
• Weekday aware ‘Master Blank’ function to turn off HV/ tubes and LEDs on weekends or during working hours
• Separate modes for colon neons during night mode
• Standard, fading, or crossfading with scrollback display modes
• ‘Slot Machine’ Cathode poisoning prevention routine
• Programmable RGB tube lighting – select YOUR favourite colour palette
• 729 colours possible. Have a different colour or your choosing every hour, or autochanging colours
• Not AC frequency dependent – works in all countries
• All user preferences stored to non-volatile memory
• Additional wireless functions if XTERNA module and Adapter are used:
  - Display of outdoor temperature in Celsius or Fahrenheit each minute.
  - Min / Max temperature in last 24 hours
  - Wireless, Auto Sync of time from GPS with auxilliary TCXO
  - GPS Sync time, and time since last GPS Fix
  - Voltage of XTERNA module battery
  - Firmware version of XTERNA module 

Download Kit Assembly Instructions Here

Full kit of parts, including double dot neon colons with glass covers, 
SMD High Voltage Module, IC sockets, tube sockets, RGB LEDs and more.

Download Kit Assembly Instructions Here

Pre-assembled SMD High Voltage Module is included

 

              
Double Dot Neon Colons with cover glasses. All parts included.

laser-cut socket holders

A very useful addition is the PIR Motion Sensor, which
powers down the clock when the room is empty. 

Compatible with our XTERNA Time / Temperature Transmitter:
(XTERNA Adapter also required)

Also compatible with our GPS Time Receiver and WiFi NTP Sync Device:

A 12V DC power adapter of minimum 1A is needed for the clock. We have a very high
quality unit with a long 1.8m (6ft) cable in our store HERE
 

Pictured here in Stainless Steel Case. Not included, but available here